Posts Tagged Trends

CAD Marketshare : BIM Marketshare : Installed Seats : Installed Base : #BIM #CAD

I thought I’d share some numbers here since I find it difficult to find them openly out there on the interweb.  I included a Market Share Pie Chart which appears to be from Gartner Research circa 2007.  Using the 55% AutoCAD figure for the total market share and using the AutoCAD installed base via 2008 of 4,162,000, which is right from an Autodesk Press release, we then can approximate the total installed seats for CAD (2D, 3D, BIM) to be around 7,567,273.  However, this figure could be derived by revenue which will distort the total installed seats figure.

If we assume that 7,567,723 figure is correct, as well as the 7% figure for Revit provided by Gartner we get installed seats of Revit to be 530,000, give or take.  That seems kind of close to the back of the envelope estimates I was coming up with by getting published accounts of installed Revit seats to be around 400,000 end of 2008, and they were selling new seats of Revit at around 20,000 per quarter, would have them around 480,000+ by the end of this year 2009.  If installed seats of Revit have not surpassed the installed seats of AutoCAD Architecture, previously Architectural Desktop, it has to be getting close, as of 2008 there was an installed base of ADT/ACA of 503,000.

Using the report as a guideline they had BIM growth at approximately 12%, if Revit is adding seats at approximately 20,000 per quarter that is a 15% gain from FY 2009. In 2008 they had an increase in revenue from Revit from the previous year of 23%, which could be attributed to sales of subscriptions and on going maintenance contracts above and beyond the 15% I came up with here.

Another interesting fact is that as a percentage of revenue 3D Products and AutoCAD itself were getting very close to parity, with AutoCAD and AutoCADLT at 32% and 3D Products at 30%.  I am not privy to how they break out all the figures but Civil 3D, Navisworks and Revit are all thrown into that bucket.  So 3D solutions has gone from 23% of FY 2008 revenue to 27% of FY 2009 revenue to 30% at the Q2 FY 2010 watermark.

Autocad Market

Some other information I found in an article at Architosh, and I have posted some of it here.

Revenue and Growth

According to JPR’s research, CAD software vendors saw combined revenues of $5.2 billion (USD) in 2007 globally. The CAD software market grew by an astounding 20% in 2007 compared to 2006. Despite a very poor US economy and the threat of US recession, the CAD industry will continue its positive economic trend and will grow to over $6 billion (USD) in 2008. Looking out five years the global CAD software market will reach and exceed $8.2 billion (USD).

2D and 3D

In 2007 the worldwide installed base of CAD users reached 5.31 million. In 2007 the majority of CAD users (63%) are still working in 2D, while 37% work in 3D. However, revenues for 3D CAD surpassed 2D CAD taking 53% of the market. This trend will continue but JPR makes note that not all 2D CAD users will make a transition to 3D CAD.

The article was based on the research from Jon Peddie Research.

To look at the 2007 figure of installed seats as reported by Jon Peddie, of 5.3 Million and a 15% Growth Rate we would get approximately 6.09 Million Users in 2008 and 7.00 Million in 2009.

Hope this was helpful for those of you at their searching for this stuff, and if you weren’t I don’t know how you got here and why you’re still reading.


, , , ,

No Comments